No/Partial Exposure

Southeast Qld Flooring Specialists

We cannot stress enough that a quality No/Partial Exposure floor all begins with the slab. The slab must be poured as evenly as possible and have a burnished finish, achieved by multiple passes with the helicopter (powered trowel) by the concreter. The concreter must also take care to eliminate footprints and screed marks.

We then grind off enough to remove any humps and bumps, leaving a flat workable area, ready for sealing or commencing the polishing process. How much needs to be ground off is totally dependent on the quality of the slab. If the slab has not been well poured and finished off correctly we may have to grind back more, leaving you with more aggregate exposure and additional costs, than you had wanted. We shall confer with you or your nominated representative e.g. builder should this occur.

The beauty of no/partial exposure is that adding to its character such oddities as screed marks might show and its patchy appearance is of great appeal to many people. However, footprints, screed marks etc that do remain are pre-existing and the responsibility of the concreter, not Southeast Floors.

 

Further information on Partial Exposure

Contact our team for Quotes & Assessments

P. 1300 733 813
E.

Showroom:
Unit 3, 134 Siganto Drive
Helensvale, QLD. Australia 4212 (view map)

Postal address:
PO Box 784
Oxenford, QLD. Australia 4210

QBCC Licence

1137429

Please leave this field empty.

Painting Contractor Husqvarna Best of Houzz

Best of Houzz 2016 Award Winner

Scroll Up